What Forms is Copper C110 Available at Piping Mart?
Copper C110 Bolts
Copper C110 Fasteners
Copper C110 Bars
Copper C110 Screw
Copper C110 Stud Bolts
Copper C110 Washers
Copper C110 Nuts
Copper C110 Coil
C110 Copper Composition
C110 Copper is an alloy composed of 99.9% copper and 0.1% phosphorus. This combination gives it a high level of strength compared to other copper alloys. The addition of phosphorus also improves its electrical and thermal conductivity while increasing its corrosion resistance.
| Cu* | Pb | Zn | Fe | P | Ag | As | O2 | Sb | Te | |
| Min | 99.99 | |||||||||
| Max | 0.0005 | 0.0001 | 0.0010 | 0.0003 | 0.0025 | 0.0005 | 0.0005 | 0.0004 | 0.0002 |
C110 Copper Chemical Properties:
The chemical composition of Cu C110 makes it resistant to corrosion by most acids and alkalis and sea water. It has good oxidation resistance when exposed to air or oxygenated water at temperatures below 300°C (572°F).
Copper C110 Mechanical Properties
The mechanical properties of Copper C110 include a tensile strength of 200 MPa (29 KSI), a hardness of 45-50 HRC (HRC = Rockwell Hardness Scale), and an elongation rate of 10-20%. It also has excellent fatigue strength and ductility, which makes it suitable for parts that require repeated flexing or bending without breaking or cracking.
| Tensile Strength | Yield Strenth1 | Elongation2 | |
|---|---|---|---|
| Temper-Annealed | 26 to 38 ksi | 6 to 13 x 1000 psi | 20-50 |
Copper C11000 Physical Properties
The physical properties of Copper Alloy C110 include a density of 8.95 g/cm3 (0.323 lb/in3), an electrical resistivity at 20°C (68°F) of 1.7 x 10-6 Ω•m (0.000106 Ω•in) and a thermal conductivity at 25°C (77°F) range between approximately 400-450 W/m•K (238-266 BTU/(hr•ft2•°F)).
|
Physical Properties 110
|
|||||
| -O/Annealed | -H00 | -H01 | -H02 | -H04 | |
|---|---|---|---|---|---|
| Density | 0.321 lb/in3 | 0.321 lb/in3 | 0.321 lb/in3 | 0.321 lb/in3 | 0.321 lb/in3 |
| Ultimate Tensile Strength | 32 ksi | 36 ksi | 38 ksi | 42 ksi | 50 ksi |
| Yield Tensile Strength | 10 ksi | 28 ksi | 30 ksi | 36 ksi | 45 ksi |
| Shear Strength | 22 ksi | 25 ksi | 25 ksi | 26 ksi | 28 ksi |
| Shear Modulus | 6,300 ksi | 6,300 ksi | 6,300 ksi | 6,300 ksi | 6,300 ksi |
| Hardness Rockwell | Brinell | B10 | 57 | B10 | 57 | B25 | 64 | B40 | 74 | B50 | 83 |
| Elongation at Break Percentage | 55% | 33% | 22% | 14% | 20% |
| Modulus of Elasticity | 17,000 ksi | 16,700-18,900 ksi | 16,700-18,900 ksi | 16,700-18,900 ksi | 16,700-18,900 ksi |
| Poisson's Ratio | 0.34 | 0.34 | 0.34 | 0.34 | 0.34 |
| Machinability Percentage | 20% | 20% | 20% | 20% | 20% |
| Melting Point | 1,949-1,981 °F | 1,949-1,981 °F | 1,949-1,981 °F | 1,949-1,981 °F | 1,949-1,981 °F |
| Specific Heat | 9.2 x 10^-2 BTU/lb-°F | 9.2 x 10^-2 BTU/lb-°F | 9.2 x 10^-2 BTU/lb-°F | 9.2 x 10^-2 BTU/lb-°F | 9.2 x 10^-2 BTU/lb-°F |
| Thermal Conductivity | 2690 BTU-in/hr-ft^2-°F | 2690 BTU-in/hr-ft^2-°F | 2690 BTU-in/hr-ft^2-°F | 2690 BTU-in/hr-ft^2-°F | 2690 BTU-in/hr-ft^2-°F |
| Electrical Conductivity | 100% IACS | 100% IACS | 100% IACS | 100% IACS | 100% IACS |
Alloy C110 Copper Equivalent
ASTM B1, B2, B8, B48, B272, B298, F68
AMS 4700
Federal QQ-W-343
